M.2 NVME SSD Convert USB Type c Auxiliary Adapter Card for Upgrade MacBook Air (2013-2017) by Newgadgets

Price: ₹1,999 - ₹256.00
(as of Oct 28, 2025 13:55:00 UTC – Details)

Product Description

This adapter is compatible with the following MacBook Models:

（Note: requires macOS 10.13 High Sierra or later）

MacBook Pro:

✔ MacBook Pro (15-inch Retina display Mid 2015)Model ID: MacBookPro11,5 (2.5GHz, 2.8GHz)

✔ MacBook Pro (13-inch Retina display Early 2015)Model ID: MacBookPro12,1 (2.7GHz, 2.9GHz, 3.1GHz)

✔ MacBook Pro (15-inch Retina Display 2014)Model ID: MacBookPro11,3 (2.5GHz, 2.8GHz)

✔ MacBook Pro (15-inch Retina Display 2014)Model ID: MacBookPro11,2 (2.2GHz, 2.5GHz, 2.8GHz)

✔ MacBook Pro (13-inch Retina Display 2014)Model ID: MacBookPro11,1 (2.6GHz, 2.8GHz, 3.0GHz)

✔ MacBook Pro (15-inch Retina Display 2013)Model ID: MacBookPro11,3 (2.3GHz, 2.6GHz)

✔ MacBook Pro (15-inch Retina Display 2013))Model ID: MacBookPro11,2 (2.0GHz, 2.3GHz, 2.6GHz)

Compatible MacBook Air:

✔ MacBook Air (13-inch Mid 2017)Model ID: MacBookAir7,2 (1.8GHz i5, 2.2GHz i7)

✔ MacBook Air (11-inch Early 2015)Model ID: MacBookAir7,1 (1.6GHz i5, 2.2GHz i7)

✔ MacBook Air (13-inch Early 2014)Model ID: MacBookAir6,2 (1.4GHz, 1.7GHz)

✔ MacBook Air (11-inch Early 2014)Model ID: MacBookAir6,1 (1.4GHz, 1.7GHz)

✔ MacBook Air (13-inch Mid 2013)Model ID: MacBookAir6,2 (1.3GHz, 1.7GHz)

✔ MacBook Air (11-inch Mid 2013)Model ID: MacBookAir6,1 (1.3GHz, 1.7GHz)

Mac Pro:

✔ Mac Pro (December, 2013) Model ID: MacPro6,1 (2.7GHz 3.0GHz, 3.5GHz, 3.7GHz)

Please Note Upgrade SSD for 2013-2015 MacBook with large capacity NVME SSD Requires macOS 10.13 High Sierra or Later Please read NVMe SSD compatible listing Please read MacBook model compatible listing

Microware M.2 NVME MacBook SSD Convert Adapter MacBook Air Pro Retina Mid 2013-2017

For A1465 A1466 A1398 A1502.Please read “How to use” below before you use this convert adapter.

Easily install

You only need to combine our adapter card with the new hard disk, and replace the previous hard disk with this new combination.

Upgrade your NVMe SSD

This is a convert adapter only. It does not have any firmware inside. All your SSD performance will not limit by this convert adapter. You can enjoy the maximum performance and capacity with your new SSD.

Another option

For some machines with limited internal space, you can choose the short card version.

How To USE

Make sure to install the High Sierra on your old drive, so that a newer firmware is installed that can handle NVME.For your old driver, please do a full backup via Time Machine.Create a High Sierra Installer on a bootable USB stick.Open the MacBook and disconnect the battery while switching out the drive and make sure both adapter and new SSD sit snug.Reconnect the battery before closing the shell.Insert the Installer USB stick from step 2, and press the option key while the machine starts.Finally, once it’s up you can now go to the disk utils to format and install the MAC OS.

Same advice

You are kindly reminded that macOS failed on resume from hibernating with some NVME SSDs of some brands. Have to turn off laptop all the time instead of close the lid and go.Please insert our adapter fully into SSD slot and you must prepare bootable USB disk (see third point) with High Sierra to format M.2 SSD first, it can’t support recover from internet.There are many customers can use it, so we suggest you to try it again if your MAC can’t detect nVME SSD.

This NVME SSD Convert Adapter is DIY kit for assembling a upgraded SSD replacement for MacBook with large capacity NVME SSD
It is compatible with MacBook Air 11” A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13″ A1502 & 15″ A1398 (Late 2013 – Mid 2015), Mac Pro ME253 MD878
Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO, WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on